Products Categories

Our Heavy-Duty Industrial Pedestrian Access Bridge is a rugged, galvanized steel footbridge built for industrial worksites, factories, and warehouses, delivering safe, durable crossings with high load capacity and minimal maintenance.

Our Steel Pedestrian Overpass combines modern design, fast installation, and durable galvanized steel construction to create safe, visually appealing pedestrian crossings for cities, campuses, and commercial developments.

Our Pedestrian Link Bridge is a prefabricated steel footbridge engineered for safe, durable, and low-maintenance pedestrian crossings. Designed for urban and industrial environments, it combines rapid installation, corrosion resistance, and customizable spans to connect communities, campuses, and facilities seamlessly.

Product Positioning

Specifically designed to provide high-load-bearing, corrosion-resistant steel pile products for deep bridge foundations, high seismic zones, and marine environments. It covers three main series: open-ended steel pipe piles (soil plug effect), closed-ended steel pipe piles (end bearing), and H-shaped steel piles (penetrating hard layers).

Core Advantages

Uses double-wall isolation layer anti-corrosion (outer pipe, inner pipe, interlayer grouting) or sacrificial anode cathodic protection, with a design life of up to 100 years; construction employs hydraulic static pile driving machines, with noise below 65dB, suitable for urban areas and nighttime operations.

Global Compliance

Strictly meets mainstream international standards such as European standards (EN 1997-1 for pile foundation design and EN 1993-5 for steel pile corrosion allowance), American standards (ASTM A572/A690 for pile materials and AASHTO LRFD Chapter 10 for pile group efficiency reduction), and Australian standards (AS 2159 for pile drivability analysis and AS 5100.3 for negative skin friction calculation).

Service Guarantee

Provides full-cycle technical support from pre-analysis of pile drivability using wave equation (WEAP), calculation of pile group efficiency factors, design of sacrificial anode cathodic protection life, to high-strain dynamic measurement signal matching (CAPWAP) and static load test schemes.

Product Positioning

Focused on lightweight steel pedestrian bridges for urban slow traffic systems, parks and scenic areas, school campuses, and river-crossing walkways, balancing safe passage with landscape aesthetics, offering both standardized and customized product solutions.

Core Advantages

Lightweight truss or plate beam structures combined with factory prefabrication allow on-site installation in just a few hours; the bridge deck integrates anti-slip, drainage, and lighting systems, achieving "finished at the factory, ready for use on site."

Global Compliance

Strictly meets mainstream international standards, including European standards (EN 1990 pedestrian loads and EN 1993 steel bridge design), American standards (AASHTO LRFD pedestrian bridge sections and ADA accessibility regulations), and Australian standards (AS 5100 and DDA accessibility codes).

Service Assurance

Provides one-stop technical support, from human-induced vibration comfort calculations, anti-slip grade selection, accessible ramp optimization, to on-site hoisting plans and nighttime construction traffic organization design.

Product Positioning

Specifically designed for emergency rescue, military rapid deployment, and permanent access in remote areas, providing fully assembled steel bridges. It uses pin-connected joints and standardized component design, requiring no on-site welding or large lifting equipment.

Core Advantages

Standard components can be combined in multiple rows and layers to accommodate different load levels. A single span can be assembled by 6–8 people within 4–6 hours, and the components can be reused 8–10 times after disassembly.

Global Compliance

Strictly meets mainstream international standards, including European standards (EN 1993-1-8 pin connections and EN 1990 emergency loads), American standards (AASHTO LRFD military load classification MLC and AWS D1.5 welding), and Australian standards (AS 5100.4 truss components and AS 2159 temporary foundations).

Service Guarantee

Provides full-process support, from load level selection (road/rail/military), span and truss layer matching, load verification for foundation-free solutions (paved or soil foundations), to on-site assembly guidance and subsequent dismantling and recycling.

Product Positioning

Focused on enclosed or open pedestrian corridors connecting two buildings, spanning city roads or scenic water bodies, offering two options: detachable modules and on-site welding, suitable for both indoor constant temperature and outdoor extreme cold environments.

Core Advantages

Both ends of the corridor are equipped with universal sliding bearings that can absorb independent settlement of the two buildings and seismic sway with different phases; the bridge deck uses hollow laminated glass with an anti-slip coating, combining light transmittance and slip resistance.

Global Compliance

Strictly meets mainstream international standards including European standards (EN 1990-2 for comfort and EN 1991-2 for crowd load), American standards (AASHTO Guide Spec for Pedestrian Bridges and ADA accessibility), and Australian standards (AS 5100.2 for pedestrian and bicycle loads and DDA accessibility).

Service Assurance

Provides full-cycle technical support, from investigation of the interface elevations of both buildings, differential settlement compensation calculations for bearings, wind-induced comfort verification, to nighttime hoisting permits for road occupation and glass fall protection design.

Our Steel Bridge Deck Forms are heavy-duty, modular steel formwork systems engineered for rapid, high-precision bridge deck pouring. Built to withstand concrete pressure and construction loads, these reusable, corrosion-resistant forms deliver smooth, consistent deck finishes while cutting construction time and labor costs. Compliant with international bridge design standards, they are ideal for highway, railway, and pedestrian bridge projects.

Our custom—engineered Steel Bridge Deck Forms deliver stable, rigid support for bridge deck concrete casting. Featuring lightweight modular panels, high reusability and anti—corrosion treatment, they ensure flat deck surfaces, fast installation and lower overall construction costs for urban, highway and coastal bridge projects.

Our Steel Bridge Deck Forms are robust, modular steel formwork systems purpose-built for high-efficiency bridge deck concrete pouring. Designed for repeated use, these rigid, corrosion-resistant forms deliver precise, defect-free deck finishes, reduce construction waste, and accelerate project timelines for highway, railway, and pedestrian bridge projects worldwide.

Product Positioning

Designed specifically for cast-in-place bridge decks and bridge deck maintenance projects, providing reusable or permanent steel formwork systems. It includes three types: quick-detachable flat forms, stay-in-place corrugated bottom forms, and prefabricated steel form shells, suitable for different main beam spacings (1.5–4.0 meters) and construction rhythms.

Core Advantages

Formwork units are prefabricated in the factory and quickly fixed on main beams or transverse beams on-site using magnetic bases or wedge locks, with no welding or drilling required; permanent corrugated plates also serve as lower reinforcement for bridge decks, saving 15–20% of rebar.

Global Compliance

Strictly meets mainstream international standards such as European standards (EN 1993-1-3 cold-formed thin-walled sections and EN 1990 construction load combinations), American standards (AASHTO LRFD bridge deck requirements and AWS D1.1 formwork support welding), and Australian standards (AS 1397 galvanized steel sheets and AS 5100.5 bridge deck construction).

Service Assurance

Provides full-cycle technical support, covering formwork section selection (including corrugation shape and plate thickness), construction load verification (self-weight of concrete, workers, pump thrust), grouting prevention at joints, cycle usage, and release agent selection.

Product Positioning

Specially designed for new bridge construction and old bridge renovation projects, providing steel bridge decks that can be quickly installed. The range includes orthotropic steel decks (long lifespan), steel-concrete composite decks (high stiffness), and temporary steel grating decks (recyclable), suitable for different traffic volumes and construction schedules.

Core Advantages

Using closed U-ribs and high-strength steel top plates, fatigue resistance is improved by 50% compared to traditional open ribs; the waterproof layer and paving are pre-installed in the factory, allowing the bridge deck system to be completed immediately on site.

Global Compliance

Strictly compliant with mainstream international standards including European standards (EN 1993-1-5 local buckling of orthotropic decks and EN 1991-2 wheel load distribution), American standards (AASHTO LRFD Appendix B fatigue details and AWS D1.5 U-rib to top plate welds), and Australian standards (AS 5100.6 composite decks and AS 4100 thin plate stability).

Service Guarantee

Provides full-cycle technical support, covering fatigue grade verification of U-rib to top plate welds, analysis of collaborative deformation between paving layer and steel plate, integrated design of expansion joint slots, on-site welding process evaluation, and nondestructive testing solutions.