Zagaye ko Rectangle Babban bututu Smooth Anticorrosive Bakin Karfe Stair Handrail

Hannun matattakala na bakin karfe an yi su ne da bakin karfe kuma an raba su zuwa ginshiƙai, ginshiƙai, sansanoni da sauran abubuwan haɗin gwiwa, galibi ana kiran su da matakala na bakin karfe a takaice.

Siffofin:

1. Kyakkyawan bayyanar, juriya mai ƙarfi, mai salo da kyan gani, haɗuwa mai dacewa, fasaha mai ƙarfi, haɓakawa, ado, da kuma amfani.An fi amfani da shi wajen ado na katako na zamani.

2. Bakin karfen gilashin dogo masu gadi ana amfani da su sosai a galibin kantuna, shaguna, da tashoshin jirgin karkashin kasa.Na farko shine kwanciyar hankali mai ƙarfi, jin daɗin hannu mai kyau, ma'anar zamani, tsaftacewa mai sauƙi, da tsawon rayuwar sabis.Ya shahara.

3. Launi yana canzawa, shigarwa yana da kwanciyar hankali, ba shi da sauƙi don tsatsa, baya canza launi kuma yana da kaddarorin anti-lalata.

Amfani:

1. Filaye yana da santsi sosai kuma yana da sauƙin kulawa.Kawai shafa shi kai tsaye tare da rigar tawul.Zane ya kasance na zamani sosai, kayan yana hana lalata, kuma ana amfani dashi sosai.

2. Tsarin yana da haske da santsi, yana jin dadi don taɓawa, karimci kuma mai dorewa, kuma ba shi da sauƙi ga canza launi.Kyakkyawan juriya na ruwa, mai sauƙin tsaftacewa da kulawa.Idan akwai tabo a samansa, kawai muna buƙatar goge shi kai tsaye tare da rigar tawul.

3. Yana da kyau karko da kuma dogon sabis rayuwa, ko da an yi amfani da shekaru 20, babu matsala.Don haka, an fi amfani da titin hannu na bakin karfe a wuraren taruwar jama'a.

4. Gabaɗaya, bakin karfe handrails suna nufin sauƙaƙan zamani da salon ado na LOFT, waɗanda suke da ɗan ƙaramin ƙarfi.A zamanin yau, ana amfani da shi sosai a mafi yawan wuraren kasuwanci.Yana jin daɗi, yana da jin daɗin zamani, kuma yana da sauƙin tsaftacewa.Abu mafi mahimmanci shi ne cewa ba ya tsatsa kuma yana da tsawon rayuwar sabis.Ya shahara sosai.

5. Farashin yana da arha.Idan aka kwatanta da katako mai ƙarfi, bakin karfe yana da rahusa.

Aikace-aikace:

Bakin ƙarfen ƙarfe na hannaye ana amfani da su a cikin ayyukan gine-gine.Ana amfani da shi sosai a gidaje, kamfanoni, wuraren shakatawa, murabba'ai, manyan kantuna, da dai sauransu.

Shigarwa:

1. Rufe ƙasa farantin.Shigar da sassan da aka haɗa (ɓangarorin da aka haɗa) Za a iya shigar da sassan da aka haɗa da layin dogo kawai tare da sassan da aka saka.Hanyar ita ce a yi amfani da bolts na faɗaɗa da faranti na ƙarfe don yin haɗin da aka shigar bayan shigarwa.Da farko sanya layin a kan ginin gine-ginen farar hula kuma ƙayyade ginshiƙi Gyara matsayi na batu, sa'an nan kuma yi rami a ƙasa tare da rawar motsa jiki, kuma shigar da ƙuƙwalwar fadadawa.Kullin yana kula da isasshen tsayi.Bayan an ɗora gunkin, sai a ɗaure murfin kuma a haɗa goro da dunƙule don hana goro da farantin karfe daga sassautawa.Haɗin kai tsakanin layin hannu da bangon bango shima yana ɗaukar hanyar da ke sama.

2. Biya.Yayin gina sassan da aka haɗa, kurakurai na iya faruwa.Sabili da haka, kafin a shigar da ginshiƙi, ya kamata a sake shimfiɗa layin don sanin daidaiton matsayin farantin da aka binne da kuma sandar da aka yi masa walda.Idan akwai wata karkatacciyar hanya, sai a gyara shi cikin lokaci.

3. welded shafi.Lokacin shigar da ginshiƙi da walƙiya ginshiƙi, ana buƙatar mutane biyu don haɗa kai.Ɗaya yana riƙe da bututun ƙarfe don kiyaye shi a tsaye kuma ba zai iya girgiza lokacin walda ba, ɗayan kuma yana yin walda, wanda dole ne a haɗa shi, kuma ya dace da ƙayyadaddun walda.

4. Welded surface tube da gilashin haši.Kafin shigarwa, an shimfiɗa layin hannu da ginshiƙan madaidaiciya ta hanyar shimfida layi.Bisa ga kusurwar wurin da aka karkata da kuma zagaye na hannun hannu da aka yi amfani da shi, ana ƙera wani tsagi a saman ƙarshen layin hannu.Sa'an nan kuma sanya layin hannu kai tsaye a cikin ramin ginshiƙi, kuma shigar da shi ta hanyar walda daga wannan ƙarshen zuwa wancan.Ana shigar da hannayen da ke kusa da su daidai kuma haɗin gwiwar sun matse.Bayan an toshe bututun ƙarfe da ke kusa da su, ana haɗa haɗin gwiwar da sandunan walda na bakin karfe, sannan a sanya su da gilashin halitta.

5. goge baki da goge baki.Bayan an naɗe duk walda, yi amfani da injin niƙa mai ɗaukuwa don santsin walda har sai ba a iya ganin waldar.

6. Shigar gilashin.An haɗa shi da gilashin inji, gilashin da sauran rails, nau'in da kauri na gilashin dogo ya kamata ya dace da buƙatun ƙira, kuma kaurin gilashin ya kamata ya zama ƙasa da 12mm.