Products Categories

Specification Bearing bar( width x thickness) 25x3, 25x4, 25x5, 30x3, 30x4, 30x5, 32x5, 40x5, 50x5, 65x5, 75x6, 75x10 etcI Bar: 25x5x3, 30x5x3, 32x5x3, 40x5x3 etc earing bar pitch 12.5, 15, 20, 23.85, 25, 30, 30.16, 30.3, 32.5, 34.3, 35, 38.1, 40, 41.25, 60 etc Twisted cross bar pitch 38.1, 50, 60, 76, 80, 100, 101.6, 120mm Surface treatment black annealed wire, hot dipped galvanized, powered coated, painting etc Greating style Plain, Smooth, Serrated, teeth, I bar                                 Remarks: other size also can be customized according to customer's request Overview Product Description Material :Mild steel & Low carbon steel, etc. Surface treatment: hot-dipped galvanized, electric galvanized. 1)Bearing bar shapes: plain or serrated or I bar type. 2)Bearing Bar Pitch (center to center): 30, 40, 60mm are recommended,but we can also do it under customer's request. 3)Bearing Bar (Load Bar) Specifications (mm):The specification(thickness of bearing bar)of plain type and serrated type is 20 x 3 to 100 x 10; 4)Cross bar pitch(mm) :38, 40, 50, 60, 76, 80, 100, 110, 120 etc. Steel grating is a type of rigid grid-like structure made from steel bars or sheets. It consists of parallel, flat steel bars or load-bearing strips that are interconnected with perpendicular bars or crossbars. The resulting pattern creates a series of open spaces or gaps, typically in a square or rectangular grid pattern.   The purpose of steel grating is to provide a durable and versatile surface for various applications. Here are some common uses and purposes of steel grating:   Flooring and Walkways: Steel grating is often used as flooring or walkway material in industrial facilities, commercial buildings, and public spaces. Its open design allows for the passage of air, light, and liquids while providing a slip-resistant surface for pedestrians.   Drainage and Ventilation: The gaps in steel grating allow water, debris, and other substances to pass through, making it suitable for drainage applications. It is commonly used as trench covers, drain covers, and platform gratings to facilitate proper water drainage and ventilation in areas prone to moisture accumulation.   Industrial Platforms and Catwalks: Steel grating provides a sturdy and stable platform for workers in industrial environments such as factories, power plants, and refineries. It can be used to create elevated platforms, catwalks, and mezzanine floors that allow access to machinery, equipment, and maintenance areas.   Safety and Security: The open design of steel grating offers better visibility and reduces the accumulation of hazardous materials such as oil, grease, or snow. It is commonly used in areas where safety and security are crucial, such as airports, railway stations, pedestrian bridges, and military installations.   Stair Treads and Ramps: Steel grating can be fabricated to create stair treads and ramps, providing a non-slip surface for safe vertical and inclined access. It is often used in industrial settings, outdoor structures, and public buildings where stairs and ramps require enhanced grip and durability.   Shelving and Storage: Steel grating can be used as a material for shelving or storage racks in warehouses, distribution centers, and retail stores. Its open design allows for better visibility, airflow, and drainage, making it suitable for storing items that may require ventilation or spillage management.   Overall, steel grating is valued for its strength, durability, corrosion resistance, and versatility. It finds applications in a wide range of industries and sectors due to its ability to provide a robust and functional surface while allowing for the passage of air, light, and fluids.  

Specification Bearing bar( width x thickness) 25x3, 25x4, 25x5, 30x3, 30x4, 30x5, 32x5, 40x5, 50x5, 65x5, 75x6, 75x10 etcI Bar: 25x5x3, 30x5x3, 32x5x3, 40x5x3 etc earing bar pitch 12.5, 15, 20, 23.85, 25, 30, 30.16, 30.3, 32.5, 34.3, 35, 38.1, 40, 41.25, 60 etc Twisted cross bar pitch 38.1, 50, 60, 76, 80, 100, 101.6, 120mm Surface treatment black annealed wire, hot dipped galvanized, powered coated, painting etc Greating style Plain, Smooth, Serrated, teeth, I bar                                 Remarks: other size also can be customized according to customer's request Overview Product Description Material :Mild steel & Low carbon steel, etc. Surface treatment: hot-dipped galvanized, electric galvanized. 1)Bearing bar shapes: plain or serrated or I bar type. 2)Bearing Bar Pitch (center to center): 30, 40, 60mm are recommended,but we can also do it under customer's request. 3)Bearing Bar (Load Bar) Specifications (mm):The specification(thickness of bearing bar)of plain type and serrated type is 20 x 3 to 100 x 10; 4)Cross bar pitch(mm) :38, 40, 50, 60, 76, 80, 100, 110, 120 etc.   Steel grating is a type of rigid grid-like structure made from steel bars or sheets. It consists of parallel, flat steel bars or load-bearing strips that are interconnected with perpendicular bars or crossbars. The resulting pattern creates a series of open spaces or gaps, typically in a square or rectangular grid pattern.   The purpose of steel grating is to provide a durable and versatile surface for various applications. Here are some common uses and purposes of steel grating:   Flooring and Walkways: Steel grating is often used as flooring or walkway material in industrial facilities, commercial buildings, and public spaces. Its open design allows for the passage of air, light, and liquids while providing a slip-resistant surface for pedestrians.   Drainage and Ventilation: The gaps in steel grating allow water, debris, and other substances to pass through, making it suitable for drainage applications. It is commonly used as trench covers, drain covers, and platform gratings to facilitate proper water drainage and ventilation in areas prone to moisture accumulation.   Industrial Platforms and Catwalks: Steel grating provides a sturdy and stable platform for workers in industrial environments such as factories, power plants, and refineries. It can be used to create elevated platforms, catwalks, and mezzanine floors that allow access to machinery, equipment, and maintenance areas.   Safety and Security: The open design of steel grating offers better visibility and reduces the accumulation of hazardous materials such as oil, grease, or snow. It is commonly used in areas where safety and security are crucial, such as airports, railway stations, pedestrian bridges, and military installations.   Stair Treads and Ramps: Steel grating can be fabricated to create stair treads and ramps, providing a non-slip surface for safe vertical and inclined access. It is often used in industrial settings, outdoor structures, and public buildings where stairs and ramps require enhanced grip and durability.   Shelving and Storage: Steel grating can be used as a material for shelving or storage racks in warehouses, distribution centers, and retail stores. Its open design allows for better visibility, airflow, and drainage, making it suitable for storing items that may require ventilation or spillage management.   Overall, steel grating is valued for its strength, durability, corrosion resistance, and versatility. It finds applications in a wide range of industries and sectors due to its ability to provide a robust and functional surface while allowing for the passage of air, light, and fluids.  

  Specification Material Galvanized steel sheet Pre-painted galvanized sheet Model No. YX25-205-820/1025 YX35-125-750 YX15-225-900  YX18-76-836  YX28-207-828  YX25-248-992  YX35-237.5-950  YX8-130-910  YX51-240-720  YX38-152-914 etc.) Sheet thickness 0.13-0.6mm Length any length,according to the transportation,generally less than 12m Color standard color:red,blue,white,grey special color:according to RAL color Characteristics weather proof;heating insulation;fireproof;anti-rust;sound insulation;long life span:more than 15 years Advantages     1) Attractive color and flexible design. 2) Resistance to extremity of weather. 3) Better thermal insistance. 4) Long lasting and very low maintenance. 5) Excellent corrosion resistance. 6) Excellent coverage of space. 7) Easy to install. 8) Environment friendly & fire proof.       Application 1:construction:prefabricated house,steel house,mobile house,modular house,villa, bungalow design,portable house/carbin,ready made house,kiosk booths,steel building... 2:container manufacturing 3:household appliances and furniture 4:vehicle and vessel manufacturing 5:others,like machinery structure parts,manufacturing shells of motors and so on Specification   Experience: Founded in 2005, more than 15 years in steel and construction materials manufacturing, integrates business of steel, building materials, hardware, and logistic service.  Certifications: ISO, CE, SGS, BV.  Production base: Four factories and one international trade company. Excellent quality and competitive price, OEM&ODM available. Packing & Delivery 1.Plastic Film+Kraft paper+Steel Strip+Purlin/Wood support. 2.Steel Pallet+plastic film+kraft paper+steel sheet+steel strip easy for your load and unload.      

Comflor 210 , Comflor 60 , Comflor 80 Composite Floor Deck Equivalent Sheet Machine Existing ComFlor 210, 60, 80 series floor decking machine has been much copied but always classified. The steel decking supports the wet concrete and construction loads. Temporary propping is eliminated and steel lost formwork is left in situ which gives fast, easy construction. The concrete slab requires full structural bar or mesh reinforcement. The wide range of Tata Steel formwork profiles ensure the optimum solution is available. Specifications: Name steel decking formwork Base material Hot Dipped Galvanized Steel Sheet Steel Grade G500 Yield strength 500MPA Thicknes 0.8 -1.5mm(normal 0.8,1.0,1.2) Zinc coating 275g/m2 Wave Height 75mm etc EffectiveWidth 600mm Length 0-11.8m Less than 5.8m load in 20GP 5.8m-11.8m load in 40GP Packing Bundle ,water-proof package with steel belt Delivery time 20 days after confirmation   Following are some of typical profiles available in market: Closed type galvanized steel floor decking YXB51-200-600 YXB65-186-558 YXB60-253-760 YXB60-180-540 YXB51-200-600 YXB65-186-558 (2) Opened type galvanized steel floor decking YX75-230-690 YX75-200-600 YX38-152-915 YX51-305-915 YX76-305-915 YX75-230-690 YX75-200-600 YX51-250-750 YX51-335-1005 YX76-344-688 (3) swallow tail galvanized steel floor decking YX51-200-600 YX51-190-760 YX51-200-800 YX51-200-600 Especially the rebar truss metal floor decking, it features: Advantages: Easy On-Site Handling Steel decking is delivered to site in pre-cut lengths, and in pre-packaged bundles. The bundles can be easily craned into work areas, and the individual sheets quickly layed by hand. One truck can carry 1,000 sq metres of decking at a time, and a team can install up to 400 sq metres in a day. Speedy, Safe Construction A composite slab effectively acts as a safe working platform. Once the slab is poured, following trades can get on with their jobs below almost immediately. At the same time, work can continue unhindered on the floors above, allowing simple installation of services. Cable trays, ductwork and service pipes can be suspended neatly underneath the slab with purpose designed clips, brackets and hangers that locate easily and quickly into recesses in the steel decking profile. While FASEC Rebar-truss triangle welded metal decking system adapts rapid construction requirements of the main steel structure and provide fast work procedures. It can save a lot of construction time compared to traditional floor decking system. It can also improve the rigidity of the floor and save the amount of steel and concrete, so as to reduce the project budget. The Surface embossed increase the bonding of floor deck and concrete, make the floor deck system has high-strength bearing capacity. It is totally fire-proof and can span long without middle propping. So from cost saving and time saving view, the FASEC rebar-truss triangle welded metal decking system is better choice. However, in much of ready design, the deck is already designed and in avoiding of redesign, recalculation and re-submit/approval, we can also offer various customized steel floor deck profiles to cater for various contractors’ need, meanwhile we will offer various technical support in the aspects of load span and stress analysis etc. Warmly welcome various clients from International market to inquiry and visit us!

Comflor 210 Composite Metal Floor Deck Alternative Deep Profiles Galvanized Steel Decking Sheet Galvanized Steel Decking Formwork provides a fast, efficient method of creating suspended concrete slabs. The composite action of steel decking also increases efficiency by forming a higher performance composite slab. It offers excellent spanning capabilities, high composite strength and minimal deflection. It is ideal for both concrete and steel frame construction. This is roll-formed from hot-dip zinc coated, hi tensile steel strip in a range of base metal thicknesses (BMT) conforming to BS/EU/AS/AISI etc various standard requirements. Specifications: Name galvanized steel decking formwork Base material Hot Dipped Galvanized Steel Sheet Steel Grade G500 Yield strength 500MPA Thicknes 0.8 -1.5mm(normal 0.8,1.0,1.2) Zinc coating 275g/m2 Wave Height 75mm etc EffectiveWidth 600mm Length 0-11.8m Less than 5.8m load in 20GP 5.8m-11.8m load in 40GP Packing Bundle ,water-proof package with steel belt Delivery time 20 days after confirmation   Following are some of typical profiles available in market: Closed type galvanized steel floor decking YXB51-200-600 YXB65-186-558 YXB60-253-760 YXB60-180-540 YXB51-200-600 YXB65-186-558 (2) Opened type galvanized steel floor decking YX75-230-690 YX75-200-600 YX38-152-915 YX51-305-915 YX76-305-915 YX75-230-690 YX75-200-600 YX51-250-750 YX51-335-1005 YX76-344-688 (3) swallow tail galvanized steel floor decking YX51-200-600 YX51-190-760 YX51-200-800 YX51-200-600 Especially the rebar truss metal floor decking, it features: Advantages: Greater Durability The steel base product has a Z350 zinc-coating mass. It was selected to provide superior corrosion protection in service, directly as a result of increased coating mass. FAMOUS steel is also available with a Z450 coating mass with a 15 year warranty*. Comprehensive shear stud welding tests across a range of base thickness with both coating masses were undertaken to ensure consistent results can be achieved on site. Unbeatable Strength Steel and concrete composite slabs are lighter and stronger than most conventional slabs. The steel decking provides tensile reinforcement, combining with the compressive strength of the concrete for an all round stronger slab. Steel decking profiles are designed to prevent any longitudinal slip between the steel and concrete in the slab itself, and any transverse movement between the slab and supporting beams. Greater Savings The weight savings achieved in composite slabs can be passed on to other areas of the design, such as foundations. And because steel decking acts as permanent formwork, it can significantly reduce the need for propping or temporary formwork -saving both time and money. While FASEC Rebar-truss triangle welded metal decking system adapts rapid construction requirements of the main steel structure and provide fast work procedures. It can save a lot of construction time compared to traditional floor decking system. It can also improve the rigidity of the floor and save the amount of steel and concrete, so as to reduce the project budget. The Surface embossed increase the bonding of floor deck and concrete, make the floor deck system has high-strength bearing capacity. It is totally fire-proof and can span long without middle propping. So from cost saving and time saving view, the FASECbuildings rebar-truss triangle welded metal decking system is better choice. However, in much of ready design, the deck is already designed and in avoiding of redesign, recalculation and re-submit/approval, we can also offer various customized steel floor deck profiles to cater for various contractors’ need, meanwhile we will offer various technical support in the aspects of load span and stress analysis etc. Warmly welcome various clients from International market to enquiry and visit us!

Bond-dek Metal Floor Decking or Comflor 80 , 60 , 210 Composite Floor Deck Equivalent Profile Galvanized Steel Decking Formwork provides a fast, efficient method of creating suspended concrete slabs. The composite action of steel decking also increases efficiency by forming a higher performance composite slab. It offers excellent spanning capabilities, high composite strength and minimal deflection. It is ideal for both concrete and steel frame construction. This is roll-formed from hot-dip zinc coated, hi tensile steel strip in a range of base metal thicknesses (BMT) conforming to BS/EU/AS/AISI etc various standard requirements. Specifications: Name galvanized steel decking formwork Base material Hot Dipped Galvanized Steel Sheet Steel Grade G500 Yield strength 500MPA Thicknes 0.8 -1.5mm(normal 0.8,1.0,1.2) Zinc coating 275g/m2 Wave Height 75mm etc EffectiveWidth 600mm   Length 0-11.8m Less than 5.8m load in 20GP 5.8m-11.8m load in 40GP Packing Bundle ,water-proof package with steel belt Delivery time 20 days after confirmation   Following are some of typical profiles available in market: Closed type galvanized steel floor decking YXB51-200-600 YXB65-186-558 YXB60-253-760 YXB60-180-540 YXB51-200-600 YXB65-186-558 (2) Opened type galvanized steel floor decking YX75-230-690 YX75-200-600 YX38-152-915 YX51-305-915 YX76-305-915 YX75-230-690 YX75-200-600 YX51-250-750 YX51-335-1005 YX76-344-688 (3) swallow tail galvanized steel floor decking YX51-200-600 YX51-190-760 YX51-200-800 YX51-200-600 Especially the rebar truss metal floor decking, it features: Advantages: Greater Durability The steel base product has a Z350 zinc-coating mass. It was selected to provide superior corrosion protection in service, directly as a result of increased coating mass. FAMOUS steel is also available with a Z450 coating mass with a 15 year warranty*. Comprehensive shear stud welding tests across a range of base thickness with both coating masses were undertaken to ensure consistent results can be achieved on site. Unbeatable Strength Steel and concrete composite slabs are lighter and stronger than most conventional slabs. The steel decking provides tensile reinforcement, combining with the compressive strength of the concrete for an all round stronger slab. Steel decking profiles are designed to prevent any longitudinal slip between the steel and concrete in the slab itself, and any transverse movement between the slab and supporting beams. Greater Savings The weight savings achieved in composite slabs can be passed on to other areas of the design, such as foundations. And because steel decking acts as permanent formwork, it can significantly reduce the need for propping or temporary formwork -saving both time and money. While FASEC Rebar-truss triangle welded metal decking system adapts rapid construction requirements of the main steel structure and provide fast work procedures. It can save a lot of construction time compared to traditional floor decking system. It can also improve the rigidity of the floor and save the amount of steel and concrete, so as to reduce the project budget. The Surface embossed increase the bonding of floor deck and concrete, make the floor deck system has high-strength bearing capacity. It is totally fire-proof and can span long without middle propping. So from cost saving and time saving view, the FASECbuildings rebar-truss triangle welded metal decking system is better choice. However, in much of ready design, the deck is already designed and in avoiding of redesign, recalculation and re-submit/approval, we can also offer various customized steel floor deck profiles to cater for various contractors’ need, meanwhile we will offer various technical support in the aspects of load span and stress analysis etc. Warmly welcome various clients from International market to enquiry and visit us!

Galvanized Corrugated Steel Composite Floor Decking Sheet For Concrete Floor Slab Construction Composite floor deck is widely used in power plants, power equipment companies, automobile exhibition halls, steel structure workshops, cement warehouses, steel structure offices, airport terminals, railway stations, stadiums, concert halls, grand theaters, large supermarkets, logistics centers, and the Olympics. Steel buildings such as stadiums and stadiums. Adapting to the requirements of rapid construction of the main steel structure, it can provide a firm working platform in a short time, and can use multiple floors to lay the profiled steel plate and layer the concrete flow of the concrete slab.   Main features:   1: Adapt to the requirements of rapid construction of the main steel structure, it can provide a firm working platform in a short time, and can use multiple floors to lay the profiled steel plate and layer the concrete flow. 2: In the use stage, the floor slab is used as the tensile reinforcement of the concrete slab, which also improves the rigidity of the slab and saves the amount of steel and concrete. 3: The embossing on the surface of the profiled board creates the greatest bonding force between the floor slab and the concrete, so that the two form a whole, with stiffeners, so that the floor slab system has high bearing capacity. 4: Under cantilever conditions, the floor slab is only used as a permanent template. The length of the cantilever can be determined according to the section characteristics of the floor panel. In order to prevent the cracking of the cantilever plate, it is necessary to match the design of the structural engineer with the negative reinforcement at the support.   Specifications: Name steel decking formwork Base material Hot Dipped Galvanized Steel Sheet Steel Grade SGCC Yield strength Q235 or Q345 Refer to Standards GB/T1591-2008 Thicknes 0.8 -1.5mm(normal 0.8,1.0,1.2) Zinc coating 60-275g/m2 Wave Height 51mm-76mm EffectiveWidth 688mm-940mm   Length 0-11.8m Less than 5.8m load in 20GP 5.8m-11.8m load in 40GP Packing Bundle ,water-proof package with steel belt Delivery time 20 days after confirmation     Following are some of typical profiles available in market: Closed type galvanized steel floor decking YXB51-200-600 YXB65-186-558 YXB60-253-760 YXB60-180-540 YXB51-200-600 YXB65-186-558 (2) Opened type galvanized steel floor decking YX75-230-690 YX75-200-600 YX38-152-915 YX51-305-915 YX76-305-915 YX75-230-690 YX75-200-600 YX51-250-750 YX51-335-1005 YX76-344-688 (3) swallow tail galvanized steel floor decking YX51-200-600 YX51-190-760 YX51-200-800 YX51-200-600   Advantages:   Greater Durability The steel base product has a Z350 zinc-coating mass. It was selected to provide superior corrosion protection in service, directly as a result of increased coating mass. FAMOUS steel is also available with a Z450 coating mass with a 15 year warranty*. Comprehensive shear stud welding tests across a range of base thickness with both coating masses were undertaken to ensure consistent results can be achieved on site. Unbeatable Strength Steel and concrete composite slabs are lighter and stronger than most conventional slabs. The steel decking provides tensile reinforcement, combining with the compressive strength of the concrete for an all round stronger slab. Steel decking profiles are designed to prevent any longitudinal slip between the steel and concrete in the slab itself, and any transverse movement between the slab and supporting beams. Greater Savings The weight savings achieved in composite slabs can be passed on to other areas of the design, such as foundations. And because steel decking acts as permanent formwork, it can significantly reduce the need for propping or temporary formwork -saving both time and money.   While FASEC Rebar-truss triangle welded metal decking system adapts rapid construction requirements of the main steel structure and provide fast work procedures. It can save a lot of construction time compared to traditional floor decking system. It can also improve the rigidity of the floor and save the amount of steel and concrete, so as to reduce the project budget.   The Surface embossed increase the bonding of floor deck and concrete, make the floor deck system has high-strength bearing capacity. It is totally fire-proof and can span long without middle propping.   So from cost saving and time saving view, the FASEC rebar-truss triangle welded metal decking system is better choice. However, in much of ready design, the deck is already designed and in avoiding of redesign, recalculation and re-submit/approval, we can also offer various customized steel floor deck profiles to cater for various contractors’ need, meanwhile we will offer various technical support in the aspects of load span and stress analysis etc.   Following are some typical detail:   Warmly welcome various clients from International market to enquiry and visit us!

  Galvanized Baseplate Color Steel Cladding Roof Sheet For Construction Company Color steel cladding is divided into single board, color steel composite board, floor decking and so on. Widely used in large public buildings, public buildings, mobile panels, and walls and roofs of integrated houses. Color steel cladding is an excellent cost effective alternative to most other cladding materials for large buildings. It is the perfect choice for farm buildings, big sheds, and commercial buildings as it covers large areas very easily and it's also a low maintenance exterior cladding that is easy to keep clean and repair. Clients can contact us freely to consult correct color steel sheet picking up or ask for preliminary product brochure if there is not existing cladding type designed or fixed yet on design drawing. After confirming the order before shipping, we can offer technical support including but not limit to offer the shop drawings and guideline for erection etc. for related contractors/erectors. Thanks. Specifications: Raw Material Color coated steel coil/Galvanized steel coil Standard AISI/ASTM/BS/GS/DIN/JIS Technology Hot Rolled/Cold Rolled Surface Technique Color coated or Galvanized coated Thickness 0.2-0.8mm Effective Width 750-1050mm Feeding Width 1000/1200mm Length as your request(usually less than 11.8m) Zinc Coating 30-275g/m2 Top color coating thickness 12+5μm Back color coating thickness 5-7μm Color regular color :red/blue/white special color:as RAL color Usage Factory/building/villa/machine structure parts Features weather proof/Anti rust/Fire proof/Heating insulation/ Long life span: more than 20 years MOQ 500Meters Package Kraft paper and iron sheet packing (standard export packing) Payment T/T; L/C; Western Union; VISA etc.   Features: 1. Light weight: 10-14 kg / square meter, equivalent to 1 / 30 of the brick wall 2. Thermal insulation: Thermal conductivity of core material: λ<=0.041w/mk. 3. High strength: It can be used as a load-bearing structure for ceilings, and it can resist bending and compression. 4. Bright color: no need for surface decoration, color galvanized steel coating anti-corrosion layer is maintained for 10-15 years. 5. Flexible and quick installation: the construction period can be shortened by more than 40%.   Advantages: 1. Compared with other plates, the color steel cladding is not only lighter in weight, but also has very good high-temperature insulation performance, which plays an important role in our safety. 2. The overall thermal conductivity of the color steel cladding is very good, and it is a standard that many materials can not reach. Because of the special process, the overall material strength is relatively high, and the overall bearing capacity is high, and it is not easy to be deformed in the case of heavy objects. 3. For the color steel cladding, the biggest advantage is that the color is bright, the color of the color steel plate is mainly bright. The overall material gloss is good, and the installation is simple and convenient. The overall decorative effect is very good. You don't need any auxiliary decoration to achieve the desired result.   Application: Color steel cladding market is mainly divided into three parts: construction, household appliances and transportation, of which the construction sector occupies the largest proportion followed by the household electrical appliance industry, transportation industry accounts for only a small part. It is mainly suitable for industrial and civil buildings, warehouses, special buildings, large-span steel structures, roofing, wall and interior decoration, etc. It has the characteristics of light weight, high strength, rich color, convenient and quick construction, anti-earthquake, fire prevention, rain proof, long life and etc.   Surface Production process   Packing & Shipping We are always ready here to wait for client’s enquiry.        

 Kingspan Steel Bar Truss Girder Deck Composite Steel Flooring Formwork for Concrete Slab Mezzanine Construction   The steel flooring formwork is a new composite steel floor decking design and it is widely applied for the mezzanine construction of commercial and civilian buildings, such as factories, hospitals, gymnasiums, schools, bridge projects and residential buildings. The steel flooring formwork is composed of two parts, the steel bar truss deck melted onto the galvanized steel sheet.   The steel flooring formwork is made of galvanized steel sheet and steel bar truss.  The metal floor deck can bear the construction load and be directly put on girders. After the simple rebar-tying work, the workers can directly pour concrete into the truss deck. The application of the steel bar truss deck greatly reduces the workload of mould putting and tear down. In a word, it can help increase the work efficiency and advance the project period.   Specifications: Name Steel flooring formwork Base Material Hot Dipped Galvanized Steel Sheet Steel Grade SGCC  Yield strength   Q235 or Q345 Refer to Standards GB/T1591-2008  Thickness 0.8mm,1.0mm,1.2mm Zinc coating 60-275g/m2 Wave Height 51mm-76mm Effective Width 688mm-940mm Length 0-11.8m Less than 5.8m  load in 20GP  5.8m-11.8m load in 40GP Packing  Bundle ,water-proof package with steel belt  Delivery time 20 days after confirmation   Advantages: 1. Steel bars are evenly arranged and the bearing mode is reasonable, which greatly reduces the engineering quantity of temporary support. 2. The double edge fold design can effectively ensure the quality of the engineering. 3. It can shorten the time by reducing 60% to 70% work load of binding steel bars. 4. It has the same mechanical properties and fire resistance as that of traditional cast-in-place floors. Because the bottom mould does not join in the load-baring, it is unnecessary to consider fire proof and anti-corrosion.   Applications: 1. Applied to precast slabs, pr-high-speed railway sleeper. 2. Used in many high-rise, ultra- high-rise steel buildings 3. Used for steel building, mezzanine floor of “LOFT” 4. The force applied to the complex, special-shaped structure, building 5. Used in-situ concrete structure(RC) buildings 6. Used in the construction of slope roof structure   Details:     Production Process:   Packing & Shipping   Welcome to send your enquiry about more technical specifications together!    

Prefabricated High Strength Stable Steel Flooring Formwork for Commercial Building Construction   The steel flooring formwork is a new composite steel floor decking design and it is widely applied for the mezzanine construction of commercial and civilian buildings, such as factories, hospitals, gymnasiums, schools, bridge projects and residential buildings. The steel flooring formwork is composed of two parts, the steel bar truss deck melted onto the galvanized steel sheet.   The steel flooring formwork is made of galvanized steel sheet and steel bar truss.  The metal floor deck can bear the construction load and be directly put on girders. After the simple rebar-tying work, the workers can directly pour concrete into the truss deck. The application of the steel bar truss deck greatly reduces the workload of mould putting and tear down. In a word, it can help increase the work efficiency and advance the project period.   Specifications: Name Steel flooring formwork Base Material Hot Dipped Galvanized Steel Sheet Steel Grade SGCC Yield strength Q235 or Q345 Refer to Standards GB/T1591-2008 Thickness 0.8mm,1.0mm,1.2mm Zinc coating 60-275g/m2 Wave Height 51mm-76mm Effective Width 688mm-940mm Length 0-11.8m Less than 5.8m  load in 20GP 5.8m-11.8m load in 40GP Packing Bundle ,water-proof package with steel belt Delivery time 20 days after confirmation   Advantages: 1. Steel bars are evenly arranged and the bearing mode is reasonable, which greatly reduces the engineering quantity of temporary support. 2. The double edge fold design can effectively ensure the quality of the engineering. 3. It can shorten the time by reducing 60% to 70% work load of binding steel bars. 4. It has the same mechanical properties and fire resistance as that of traditional cast-in-place floors. Because the bottom mould does not join in the load-baring, it is unnecessary to consider fire proof and anti-corrosion. Applications: 1. Applied to precast slabs, pr-high-speed railway sleeper. 2. Used in many high-rise, ultra- high-rise steel buildings 3. Used for steel building, mezzanine floor of “LOFT” 4. The force applied to the complex, special-shaped structure, building 5. Used in-situ concrete structure(RC) buildings 6. Used in the construction of slope roof structure Details:   Production Process:   Packing & Shipping   Welcome to send your enquiry about more technical specifications together!

1.2mm Gauge Galvanized Steel Decking Formwork to Bottom of Concrete Slab The steel flooring formwork is a new composite steel floor decking design and it is widely applied for the mezzanine construction of commercial and civilian buildings, such as factories, hospitals, gymnasiums, schools, bridge projects and residential buildings. The steel flooring formwork is composed of two parts, the steel bar truss deck melted onto the galvanized steel sheet.   The steel flooring formwork is made of galvanized steel sheet and steel bar truss.  The metal floor deck can bear the construction load and be directly put on girders. After the simple rebar-tying work, the workers can directly pour concrete into the truss deck. The application of the steel bar truss deck greatly reduces the workload of mould putting and tear down. In a word, it can help increase the work efficiency and advance the project period.   Specifications: Name Steel flooring formwork Base Material Hot Dipped Galvanized Steel Sheet Steel Grade SGCC Yield strength Q235 or Q345 Refer to Standards GB/T1591-2008 Thickness 0.8mm,1.0mm,1.2mm Zinc coating 60-275g/m2 Wave Height 51mm-76mm Effective Width 688mm-940mm Length 0-11.8m Less than 5.8m  load in 20GP 5.8m-11.8m load in 40GP Packing Bundle ,water-proof package with steel belt Delivery time 20 days after confirmation   Advantages: 1. Steel bars are evenly arranged and the bearing mode is reasonable, which greatly reduces the engineering quantity of temporary support. 2. The double edge fold design can effectively ensure the quality of the engineering. 3. It can shorten the time by reducing 60% to 70% work load of binding steel bars. 4. It has the same mechanical properties and fire resistance as that of traditional cast-in-place floors. Because the bottom mould does not join in the load-baring, it is unnecessary to consider fire proof and anti-corrosion. Applications: 1. Applied to precast slabs, pr-high-speed railway sleeper. 2. Used in many high-rise, ultra- high-rise steel buildings 3. Used for steel building, mezzanine floor of “LOFT” 4. The force applied to the complex, special-shaped structure, building 5. Used in-situ concrete structure(RC) buildings 6. Used in the construction of slope roof structure Details:   Production Process:   Packing & Shipping   Welcome to send your enquiry about more technical specifications together!

Anti-seismic Galvanized Corrugated Steel Floor Decking Permanent Upholding Slab Floor Decking Steel Sheet is roll formed by roll forming machine, mainly using galvanized steel, at thickness 0.8 - 1.2mm. Simple shape with high rib and high strength. Put the panel above the welded wire net, fill cement between them. This panel is usually used as the floor of high buildings, it can save steel mound and can also save the weight, in the same loading capacity, use this panel, and save the steel quantity, and thus save cost.   Floor decking steel sheet is roll formed by roll forming machine, mainly using galvanized steel, at thickness 0.8 - 1.2mm; Simple shape with high rib and high strength. Put the panel above the welded wire net, fill cement between them. This panel is usually used as the floor of high buildings, it can save steel mound and can also save the weight, in the same loading capacity, use this panel, and save the steel quantity, and thus save cost.   Features: 1. Floor decking steel sheet is roll formed by roll forming machine, mainly using galvanized steel, at thickness 0.8 - 1.2mm. 2. Simple shape with high rib and high strength. 3. Put the panel above the welded wire net, fill cement between them.   Galvanized composite metal floor decking Our Roof Decking range offers a variety of metal thickness (0.50 mm to 1.5mm) profile and finish to meet different requirements regarding span , insulation, water proofing, imposed load, thermal efficiency and any other considerations. 1. It can be used as a permanent structural support member for slab. 2. It will enable fast construction of building roofs and floors save up to 50% of construction time of the slab and roof. Once design as composite structural, will allow either to reduce or to eliminate the structural steel used in RCC slabs. 3. It combines exceptional spanning capabilities with reduced concrete usage to provide a cost-effective and attractive floor solution that's easy to install .   Specification and details of galvanized composite metal floor deck floor Decking Thickness 0.8-1.2mm; max 1.5mm Length 0mm-11800mm Width 600mm-1025mm (depend on the model you chose) Thickness Tolerance: +/-0.04mm Width Tolerance: +/-5mm Zinc Coating: 60-275g/m2; Certification ISO9001 Packing Seaworthy packing   Characteristics   1. There are processed slots between the corrugations of the profiled steel plates, available for engineering use like electric power and communications. 2. The dead load of the entire structure is reduced, saving the basic cost of the lower part. 3. During construction, the profiled steel plate can enhance the lateral stability of the supporting steel beam. 4. It gives full play to the mechanical properties of two materials - steel and concrete. 5. It does not require form work, getting rid of the removal and installation of form-works. 6. The profiled steel plate is equal to tensile main rib based on calculation, only moisture reinforcements are needed. 7. The profiled steel plates provide an even ceiling surface for concrete buildings. 8. After installation, the profiled steel plate can be used as a safety work platform for workers, tools, materials andequipment. 9. Low Cost.   Advantages:   Greater Durability The FAMOUS steel base product has a Z350 zinc-coating mass. It was selected to provide superior corrosion protection in service, directly as a result of increased coating mass. FAMOUS steel is also available with a Z450 coating mass with a 15 year warranty. Comprehensive shear stud welding tests across a range of base thickness with both coating masses were undertaken to ensure consistent results can be achieved on site.   Unbeatable Strength Steel and concrete composite slabs are lighter and stronger than most conventional slabs. The steel decking provides tensile reinforcement, combining with the compressive strength of the concrete for an all round stronger slab. Steel decking profiles are designed to prevent any longitudinal slip between the steel and concrete in the slab itself, and any transverse movement between the slab and supporting beams.   Greater Savings The weight savings achieved in composite slabs can be passed on to other areas of the design, such as foundations. And because steel decking acts as permanent formwork, it can significantly reduce the need for propping or temporary formwork -saving both time and money. Easy On-Site Handling Steel decking is delivered to site in pre-cut lengths, and in pre-packaged bundles. The bundles can be easily craned into work areas, and the individual sheets quickly layed by hand. One truck can carry 1,000 sq metres of decking at a time, and a team can install up to 400 sq metres in a day.   Speedy, Safe Construction A composite slab effectively acts as a safe working platform. Once the slab is poured, following trades can get on with their jobs below almost immediately. At the same time, work can continue unhindered on the floors above, allowing simple installation of services. Cable trays, ductwork and service pipes can be suspended neatly underneath the slab with purpose designed clips, brackets and hangers that locate easily and quickly into recesses in the steel decking profile.   Application: Power plant, power equipment company, car showroom, steel structure plant, cement warehouse airport terminal, railway station, stadium, concert hall, theater, supermarket, logistics center, exhibition hall, etc. Meanwhile we can also different models of decking series. Please check bellow pictures. If you prefer any of them, please contact with me directly.