Products Categories

Product Positioning:Focused on lightweight steel pedestrian bridges for urban slow traffic systems, parks and scenic areas, school campuses, and river-crossing walkways, balancing safe passage with landscape aesthetics, offering both standardized and customized product solutions.

Core Advantages:Lightweight truss or plate beam structures combined with factory prefabrication allow on-site installation in just a few hours; the bridge deck integrates anti-slip, drainage, and lighting systems, achieving "finished at the factory, ready for use on site."

Global Compliance:Strictly meets mainstream international standards, including European standards (EN 1990 pedestrian load and EN 1993 steel bridge design), American standards (AASHTO LRFD pedestrian bridge sections and ADA accessibility regulations), and Australian standards (AS 5100 and DDA accessibility specifications).

Service Assurance:Provides one-stop technical support, from human-induced vibration comfort calculations, anti-slip grade selection, accessible ramp optimization, to on-site hoisting solutions and nighttime construction traffic organization design.

Product Line: Bailey Truss Bridge | Rolled-Girder Bridge | Plate & Box Girder Bridge | Launch Slide-In Bridge | Temporary Diversion Bridge | Pedestrian Bridge

Authorized Standards: AASHTO LRFD 2020, EN 1993, AS 5100:2017, EN 1090 CE, AWS D1.5, ISO 9001

Core Advantages: Modular factory prefabrication | Fast on-site erection | Reusable & relocatable | Permanent / temporary dual use | Containerized export packaging | Zero traffic interruption

Our Steel Bridge Piling is a robust, high-performance steel foundation solution engineered to deliver exceptional load-bearing capacity and long-term stability for bridge and heavy infrastructure projects. Designed to withstand extreme geotechnical conditions, dynamic loads, and corrosive environments, these piles provide a reliable deep foundation for highway bridges, railway crossings, and coastal structures. Compliant with AISC (US), EN 1993-5 (EU), and AS 5100 (AU) standards, they offer customizable diameters and lengths, rapid installation, and minimal environmental impact. Ideal for both new construction and bridge rehabilitation projects, they come CE marked and ISO 9001 certified for global reliability.

Product Positioning:Designed specifically for emergency rescue, military engineering, and infrastructure in remote areas, providing rapidly deployable, reusable steel bridge solutions covering temporary passages, post-disaster reconstruction, and permanent small-to-medium-span bridges.

Core Advantages:Standardized component design with fully bolted connections requires no on-site welding. A skilled team can complete the erection of a single span within hours; components are highly interchangeable, allowing for dismantling and reconstruction at different locations later, maximizing asset utilization.

Global Compliance:Strictly meets major international standards, including European standards (EN 1993 steel bridge design and EN 1090 manufacturing), American standards (AASHTO LRFD and AWS D1.5 welding), and Australian standards (AS 5100 bridge series and AS 1554 welding).

Service Assurance:Provides one-stop, full-cycle technical support, from load class selection, span configuration optimization, and transport packaging solutions to on-site assembly guidance and later dismantling and recycling.

Bridges are the lifelines of transportation, connecting cities, spanning rivers and seas, and bearing the weight of countless journeys every day. Behind every stable and long-lasting bridge lies a solid foundation—and steel bridge piling stands as the unshakable core of that foundation. Combining superior material performance, efficient construction efficiency and reliable structural safety, it has become the preferred solution for deep foundation engineering in long-span bridges, cross-sea bridges and urban bridge projects worldwide, laying a firm groundwork for modern bridge construction.

Bridge Types: Deck-Type · Through · Half-Through · Tied Steel Arch Bridge

Certified Standards: AASHTO LRFD 2020, AS 5100, EN 1993 Eurocode 3, ASTM A709, AWS D1.5, EN 1090 & CE Certified

Core Strengths: Ultra-long span up to 250m | 100+ Year Design Lifespan | Seismic & Wind Resistant | High Fatigue Performance | Full Modular Prefabrication

Fabrication Highlights: Factory Pre-assembly & Trial Fit | Robotic Automatic Welding | Full NDT Inspection (UT/RT/MT) | Seaworthy OOG Professional Packaging

One-Stop Services: Custom Structural Design | Marine-Grade Anti-corrosion | Global Logistics Arrangement | On-Site Installation Technical Guidance

Product Positioning:Focused on lightweight steel pedestrian bridges for urban block corridors, park greenways, campus and hospital internal passages, offering two product lines: standardized modules and customized landscape solutions.

Core Advantages:Lightweight truss or steel plate beam structures combined with prefabricated assembly technology, requiring only a few hours for on-site installation; bridge decks integrate anti-slip, drainage, and lighting systems, achieving "finished at the factory, installed on site."

Global Compliance:Strictly meets mainstream international standards including European standards (EN 1990 pedestrian load and EN 1993 steel bridge design), American standards (AASHTO LRFD pedestrian bridge section and ADA accessibility regulations), and Australian standards (AS 5100 and DDA accessibility code).

Service Guarantee:Provides one-stop technical support from pedestrian vibration comfort calculation, anti-slip grade selection, accessible ramp optimization to on-site lifting plans and nighttime construction traffic organization design.

Bridge Types: Through Steel Arch Bridge | Half-Through Arch Bridge | Deck-Type Steel Arch Bridge | Tied Arch Bridge

Design Standards: AASHTO LRFD 2020, AS 5100, EN 1993 Eurocode 3, ASTM A709, AWS D1.5, CE & EN 1090 Certified

Core Strengths: Ultra-long span up to 250m | 100+ year design life | Seismic & wind load optimized | High fatigue resistance | Fully modular prefabrication

Fabrication: Factory pre-assembly & trial fit | Robotic automatic welding | Full NDT (UT, RT, MT) inspection | Seaworthy OOG professional packaging

Services: Custom structural design | Marine-grade anti-corrosion | Global logistics arrangement | On-site installation technical guidance

Product Positioning:Specially designed for cast-in-place concrete bridge deck panels, offering reusable or stay-in-place steel formwork systems. It covers three main product lines: corrugated steel bottom forms, permanent composite forms, and quick-release forms, suitable for different construction rhythms and structural requirements.

Core Advantages:Factory-prefabricated standardized units enable on-site installation without scaffolding support; corrugated ribs significantly enhance stiffness, capable of supporting the self-weight of wet concrete and construction live loads, and can serve as bottom-layer reinforcement in the structural load-bearing of the bridge deck (permanent type).

Global Compliance:Strictly complies with major standards including European (EN 1993-1-3 cold-formed thin-walled design and EN 1090 fabrication), American (AASHTO LRFD bridge deck requirements and AWS D1.5 welding), and Australian (AS 5100 bridge deck guidelines and AS 1397 coated steel) standards.

Service Guarantee:Provides full-cycle technical support from formwork section selection, load condition calculations (concrete pouring pressure, construction stacking, and vibration live loads), joint design, to on-site installation guidance and removal plans.

Product Categories: Straight steel box girder, curved box girder, variable cross-section box girder, multi-cell steel box girder

Global Compliance: AASHTO LRFD 2020, AS5100, EN 1993 Eurocode 3, ASTM A709, EN 1090 / ISO 3834 certified

Core Performance: High torsional rigidity, lightweight structure, large-span capability, superior wind & seismic resistance

Anti-Corrosion Solution: Sa2.5 blasting grade, multi-layer paint system, hot-dip galvanized & thermal zinc spraying available

Project Service: Custom design, factory pre-assembly, NDT inspection, global logistics & on-site technical guidance

Product Types: Composite steel floor deck, Bondek profiled deck, Comflor 60/80/210 series, precast concrete bridge deck panels

Global Standards: AASHTO LRFD 2020, AS5100, Eurocode 3, ASTM A709, AWS D1.1

Core Features: Hot-dip galvanized, high load-bearing, fast installation, low maintenance, full custom design

Applicable Projects: Highway bridge, municipal overpass, river-crossing bridge, temporary emergency bridge

Factory Strength: Professional China Steel Bridge Factory, one-stop fabrication, global export & technical support

Product Positioning:Specifically designed to provide economical and efficient steel plate girder solutions for medium to short-span highways, urban viaducts, and railway bridges, covering a span range of 20 to 60 meters, accommodating both composite and non-composite girder structures.

Core Advantages:Utilizes factory-welded I-shaped steel sections, featuring a high web thickness-to-height ratio and light self-weight; can be combined with precast concrete bridge decks to form composite girders, improving load-bearing capacity by 30%–50%, with cost-effectiveness superior to steel box girders and truss bridges.

Global Compliance:Strictly meets mainstream international standards, including European standards (EN 1993-1-5 plate buckling and EN 1994 composite structures), American standards (AASHTO LRFD I-girder design and AWS D1.5 welding), and Australian standards (AS 5100.4 steel girder rules and AS 1554 welding).

Service Assurance:Provides full-cycle technical support from web stiffener optimization, flange width-to-thickness ratio verification, shear buckling analysis, to on-site splicing node design and construction-phase stability checks.